Pump Specifications:
Type:
Transfer – Supply – Firefighting

Intake:
4” (100mm) BSRT or
3 ½” (75mm) Female BSPT

Discharge:
Twin Screw down Bronze Rotating outlets, 50mm BSP Threads

Volute Body And Head:
Aluminium Alloy CC601 heat-treated
To T6 Hardness. Optional Full Bronze.

Impeller:
Aluminium Alloy CC601 fully enclosed. Optional full Bronze.

Wear Rings:
Long Wearing PFPT, Economical to replace.

Shaft Seal:
Spring loaded Mechanical Carbon Ceramic

Priming:
Exhaust Ejector, Fast and easy to use
Will prime 3 metres in 15 seconds.

Engine Specifications:
3Y,Gasoline OHV, 4 cylinder in line, Carburetted, 1997cc water-cooled through heat exchanger, compression ratio 8.8:1, 62.5kW @ 4600 RPM. Stainless Steel exhaust

Electrical

12 volt negative earth. 

Battery

12 volt VRLA


Fuel Tank:
16 litre stainless steel.

• The instrument panel housing the controls and gauges are in one location and illuminated with a panel light for night operations and / or areas where lighting is minimal. The instrument panel includes the following:
• Throttle Control
• Primer Control
• Battery State Meter
• Hours Run Counter
• Fuel Contents Gauge
• Oil Pressure Gauge
• Engine Coolant Temperature Gauge
• Engine overheat protection 
• Pump and Control Panel Lighting
• Ancillary Socket for charging and 12V supply for optional lighting mast.
• Ignition switch which includes a lockout feature to prevent accidental starting.
• Push Button starter
• Pump Compound Gauge
• Pump Delivery Gauge

Accessories:
Wheel set for 1 person portability.